802.11 b/g/n + 5.2 BT/BLE + PSoC6 (Cortex M0 & M4)

Features

The ISM43439-WBP-L151 SiP (System In Package), is an “ALL” Infineon based IoT platform (Infineon Radio + Infineon MCU + Certified Antenna). The ISM43439-WBP-L151 SiP is also a cost-effective, high performance and secured IoT architecture with one of the industry’s only dedicated Wi-Fi 4 solutions to deliver the latest WPA3 security standard. As a Wi-Fi/Bluetooth/BLE combo chip for IoT applications. Inventek ISM43439-WBP-L151 module also includes an integrated PSoC 6 MCU. Herald as the sixth generation of the PSoC family, PSoC 6 is purpose-built to speed the development of any IoT application, the ultra-low-power dual-core PSoC 6 family features both an Arm Cortex-M4 and Cortex-M0+ core. Ideally suited for battery-powered applications, the dual-core architecture permits embedded developers to optimize their design for power and performance. As with any IoT application, security is a primary requirement, and the integrated PSoC 6 MCU incorporates Arm's latest platform security architecture (PSA).

The ISM43439-WBP-L151 supports the following WLAN, Bluetooth & MCU functions:


• PSoC 62 ARM 32-bit CortexTM- M0 + M4 with a frequency up to 100 MHz

o ARM Cortex-M4 (100MHz)
o ARM Cortex-M0 (50MHz)
o 1MB of MCU internal Flash
o 512KB of SRAM
o 2MB Quad SPI Flash
o SPI (supports Dual mode), USART, PCM
o ADC, I2C, I2S, GPIO, Timers
o JTAG


• Single-band 2.4 GHz b/g/n, 802.11b, 802.11g, 802.11n (single stream)

o IEEE 802.11b 1 – 11 Mbps
o IEEE 802.11g 6 – 54 Mbps
o IEEE 802.11n (2.4 GHz) 7.2 – 150Mbps


• WPA3-R3
• BT 5.2 COEX
• Infineon Modus Fully compatible
• IEEE 802.11b/g/n single-band radio with internal Power Amplifiers, LNAs and T/R switches
• Hardware Encryption WEP, WPA/WPA2
• Modulation Modes include:
o Wi-Fi: CCK and OFDM with BPSK, QPSK, 16 QAM, 64QAM, 256QAM
o BT: Dual-mode classic Bluetooth and
• Classic Low Energy operation
• Concurrent Bluetooth and WLAN operation
• Single antenna support
• Supports a single 2.4 GHz antenna shared between WLAN and Bluetooth
• BT host digital interface (can be used concurrently with above interface):
• o UART (up to 4 Mbps)
• Bluetooth v5.2 with integrated Class 1 PA
• Bluetooth 2.1+EDR, Bluetooth 3.0, Bluetooth 5.2 (Bluetooth Low Energy)
• Bluetooth v5.2LE Secure Connection via the Cypress BSA stack.
• ECI – enhanced coexistence ability to coordinate BT SCO transmissions for WLAN receives.
• I²S/PCM for BT audio
• HCI high-speed UART (H4, H4 +, H5) transport support
• Bluetooth low power inquiry and page scan

Specifications		Search Alternatives   User selected specs
WiFi	Generation: Wi-Fi 4	3411|Generation: Wi-Fi 4 |MultiSpecSelect
	Standard: 802.11b , 802.11g , 802.11n	3198|Standard: 802.11b , 802.11g , 802.11n |MultiSpecSelect
Operating temperature	-40 to 85 °C	3363|-40 to 85 °C|MultiSelect
Dimensions	Length: 10.0 mm	2728|Length: 10.0 mm|Decimal
	Width: 10.0 mm	2729|Width: 10.0 mm|Decimal
	Height: 1.2 mm	2730|Height: 1.2 mm|Decimal
Power	Input voltage: 3.0 V ~ 3.6 V V	2684|Input voltage: 3.0 V ~ 3.6 V V|MultiSelect
Certifications	FCC , IC , CE	2683|FCC , IC , CE |MultiSpecSelect
Type of product	WiFi + Bluetooth 5.2 module	943|WiFi + Bluetooth 5.2 module |MultiSpecSelect
Digital interface	SPI , Quad SPI , USART , PCM	939|SPI , Quad SPI , USART , PCM |MultiSpecSelect
Mounting	SMT	942|SMT |Select