Recent 'BLE' News


The ISP1507-AL module from Insight SiP is a low cost standalone Bluetooth Low Energy node is a small package (8x8x1mm). This complete BLE & Mesh solution integrates the nRF52810 chip from Nordic Semiconductor, an embedded antenna and an integrated DC/DC converter that includes both radio and synchronization crystals. The module runs the Nordic Bluetooth soft device which supports a full Bluetooth V4.2 stack and is Bluetooth 5.0 ready.
The PMM240-MG from RRC is a dc/dc converter in the format of a RRC 2040 which converts the 19-24V of the charger power supply to the battery voltage of approximately 12V.
The Epson SG-8101 programmable oscillators, and SG-9101 spread-spectrum programmable oscillators series have an excellent frequency stability and are able to operate in a wide temperature range. They offer a 50% lower current consumption than comparable Epson products, while the SG-8101 also has 66% tighter frequency tolerance.
The ESP-WROVER-KIT from Espressif is a development board built around ESP32. This board is compatible with ESP32 modules, including the ESP-WROOM-32 and ESP32- WROVER (the tiny powerful, generic WiFi-BT-BLE MCU modules). Whether you need external pSRAM for IoT applications, or an LCD+camera interface, this is the kit you need.
RRC Power Solutions released the upgraded version of their RRC-PMM240 power management module. Compared to the earlier version the standby current decreased to a typical 1mA resulting in a longer battery life. Next to this the minimum input voltage dropped to the battery charge voltage +1V and the output current increased to 10A max., with an 12A application output fuse. The battery discharge current increased to 10A max.
The RTC-1200SK from AAEON Technology is one of the most complete IP65 rugged tablet computers in today's market. With its various I/O's on board ranging from COM and Ethernet to 3 USB ports and a HDMI port, you basically have a complete mobile panel PC/HMI, but then with 2 hot-swappable batteries. The fact that the RTC-1200SK has been designed with customization in mind, this 11.6" work horse will fit your exact needs.
The WEO012832D/F from Winstar is a popular small OLED display series with built-in SSD1303BZ IC controller. With a diagonal size of 0.91”, 128x32 pixels, these displays are specifically designed for wearable devices.
Espressif offers the ESP-WROOM-32, a tiny powerful, generic WiFi-BT-BLE MCU module which supports data rates up to 150Mbps and 22dBm output power. The integration of Bluetooth, Bluetooth LE and WiFi ensures that a wide variety of applications ranging from low power sensor networks to the most demanding tasks such as voice encoding, music streaming e.g.. With a sleep current of 5µA the ESP-WROOM-32 is suitable for battery powered and wearable electronics applications.

Nautilus series from GradConn is a premium range of dust and waterproof coaxial cable assemblies. With IP67 & IP68 ratings, Nautilus products offer protection from moisture and particle ingress, both mated and unmated.

Working in conjunction with customers this range of waterproof interface connectors is constructed with internal seal and O-Ring, which prevents ingress thru the inner contact and thru the panel. The connectors have been tested to IP6x, IPx7, IPx8 for both 1 and 5 metres underwater, perfect for applications in demanding harsh environments.

Nautilus connectors available are SMA front and rear mount, RP SMA, TNC, RP-TNC & BNC. Cable assemblies are available for a huge variety of coax connectors, specialising in Micro coax types such as Hirose, Murata & I-Pex.

The
Nautilus series consists of 8 key connector types, with 17 cable assemblies as standard. In addition, hundreds of different Nautilus cable assemblies can be configured to meet your requirements.


Applications
•  Asset tracking
•  Metering
•  Agriculture technology
•  Remote sensing
•  Security
•  Rugged hand-helds

AAEON has released the RTC-700A 7" and RTC-900R 10.1" rugged tablet computer, a computing platform for portable and mobile applications that operate in harsh environments.

The computer is powered by the NVIDIA TEGRA2 1.0 GHz Dual Core processor running the android v4.0/v3.2 operating system and has an intuitive graphic user Interface. They have a high resolution WXGA TFT LCD display with anti-scratch Gorilla™ glass, a projected capacitive multi-touch panel and a high capacity battery.

Features such as a G-sensor, 3-axis digital gyroscope, vibrator motor, light sensor, E-compass and GPS navigation, front and rear camera and micro SD card slot, make the RTC-700A and RTC-900R suitable for all kind of applications that require a portable data input device.

Features
•   NVIDIA TEGRA 2 1.0 GHz Dual Core Processor
•   DDR2 1GB SDRAM
•   WXGA (1280 x 800) TFT LCD display
•   Projected capacitive multi-touch panel, gorilla™ glass
•   Li-Polymer high-capacity battery, 6 hrs. (RTC-700A) 12 hrs. (RTC-900R)
•   Rugged, water and dust proof, IP65 compliance
•   WiFi 802.11 b/g/n, bluetooth R 2.1 + EDR
•   G-Sensor, light sensor, e-compass, GPS navigation
•   Micro SD card slot, 5M pixel camera
•   Android v4.0/v3.2

Optional
•   Sunlight readable
•   Barcode reader 2D/1D
•   MSR / SCR
•   Docking
•   NFC/RFID
•   3G

Applications
•   Industrial
•   Marine
•   Government
•   Business automation
•   Utilities
•   Logistics
•   Professional service
•   Emergency medical service
•   Transportation
•   Field services
The RTC-900B from AAEON Technology is a Windows® 8.1-powered rugged tablet, specifically engineered for on-the-go computing. This 10.1" multi-touch MIL-STD 810G-compliant tablet is equipped with a tempered Gorilla glass-protected LCD that offers 350 nits brightness, 800 nits is optional available. The RTC-900B comes with a scratch, vibration and IP65 water-proof design, and an extended battery life of up to 7 hours.

Built in WiFi, 3G and NFC capabilities provides optimal communication connectivity, also included are physical I/Os including microSD card and USB ports. A smart card reader and TPM module offer additional security. The accompanying dock can be used for charging and provides additional expansion ports (USBs, COM, Ethernet, etc.). 4G technology can be incorporated upon request.

The Windows 8.1-powered tablet offers backward compatibility with legacy software. Its sturdy enclosure helps to minimize accidental damage to its internal components while out in the field. In addition, the robust connectivity features offered by the RTC-900B allows data to be sent and received instantaneously, opening cloud computing options and providing real-time data for advanced fleet management purposes.

The RTC-900R is the Android powered version of this tablet.


Features
•  10.1" WXGA (1280 x 800) TFT LCD display
•  PCAP 10 point multi-touch screen
•  Brightness: 350 nits, 900 nits (Optional)
•  Intel® Atom™ E3825 CPU
•  DDR3L SDRAM 4GB
•  Li-Polymer high capacity battery, 7 hours battery life
•  MIL-STD-810G, IP65 compliant
•  Operating temperature -20°C to +55°C
•  Micro SD card slot, 5M pixel camera
•  WLAN 802.11 a/b/g/n, Bluetooth 4.0
•  GPS navigation, G-sensor, light sensor
•  Windows® Embedded 8.1 Industry Pro


Applications
•  Logistics management
•  Factory automation
•  Fleet management
•  Retail



Back to top of page
© Texim Europe 2009 - 2019. All rights reserved.     Disclaimer - Cookies and Privacy - Terms of Delivery - Customs - AEO Certificate
Facebook Button    Twitter Button    Linkedin Button    Google Plus Button