Recent News containing 'FR'



  • Texim EuropeCOVID-19
  • Fortunately, COVID illness cases in Europe have decreased to a number where any still existing government measures only have limited impact on the Electronics industry. Although in other parts of the World COVID measures can still influence supply chains, other World-wide geopolitical and economic developments currently have a much stronger influence. The result is that product lead times remain exceptionally long and unreliable. Prices change (increase) very often, including on confirmed orders. We are therefore very grateful to all our customers to trust us source their requirements and will continue to do everything in our power to stay as reliable and pro-active as possible in our confirmations and service levels. We also remain cautious about a potential revival of COVID and are well prepared to take the necessary steps should new measures be announced yet again.

  • Insight SiPBLEWireless CommunicationBluetooth
  • The ISP1507-AL module from Insight SiP is a low cost standalone Bluetooth Low Energy node is a small package (8x8x1mm). This complete BLE & Mesh solution integrates the nRF52810 chip from Nordic Semiconductor, an embedded antenna and an integrated DC/DC converter that includes both radio and synchronization crystals. The module runs the Nordic Bluetooth soft device which supports a full Bluetooth V4.2 stack and is Bluetooth 5.0 ready.

  • COTOPassive DevicesSensorMagnetic
  • Using proven TMR (Tunneling Magnetoresistance) technology, the high-performance RedRock™ RR121 TMR digital logic sensors from Coto Technology offer high magnetic sensitivity with high hysteresis, EMF resistance, and a small package size, all while consuming almost NO POWER! These sensor devices offer multiple configurations of several parameters to enable applications like proximity sensing, rotary sensing, and level detection.

  • ACCES I/O
  • The USB-AO-ARB1 from ACCES I/O is a USB high speed arbitrary waveform output board with flexible ranges and configurable digital I/O lines. This plug-and-play waveform generator is an ideal solution for adding portable, easy-to-install high-speed analog output capabilities to any computer with a USB 2.0 port.

  • HAHNTransformersElectronic
  • The HS-series from HAHN are EuP, VDE- and UL approved 3W power AC/DC converters in EI30 housing. Based on switch mode technology these transformers offer a voltage transfer loss of < 0.15 W and an efficiency of > 70 %! They are ideal for applications within the broad input voltage range of 85 to 265V for power supplies.

  • RAFISwitching DevicesPanel switchE stop
  • The LUMOTAST 16 from RAFI is a compact pushbutton/switch series with a rugged one-piece design that simplifies and reduces installation time. The flexibility and reliability of this space-saving single pushbutton series, consisting of pushbutton, illuminated pushbutton and emergency stop, is impressive. Fitting in a 16.2mm mounting hole, offering a mounting depth of 18.2mm, the LUMOTAST 16 is ideally suited for space critical designs that require both customizable switch input, and emergency shutdown capabilities.

  • PIHERSensorContactless
  • The true hall-effect contactless position sensors from PIHER provide excellent repeatability, accuracy, resolution, linearity and high stability under harsh environment conditions such as vibration, electromagnetic noise, shock, extreme temperatures, dither, moisture or dirt.

  • TEConnectivity
  • The M8/M12 connector system from TE Connectivity provides a solution that safely and reliably ensures communication in industrial environments. Designed for exposure to harsh environments and extreme temperatures, these connectors are ideal for machine industrial automation and control applications.

  • 3onedataPoE switch
  • The IPS7112G-4GS-8POE from 3onedata is an industrial grade, managed and redundancy Ethernet switch which supports 8 Gigabit PoE ports and 4 Gigabit SFP slots. The switches are classified as power source equipment (PSE) which can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.

  • 4D Systemsgen4intelligent displays modules
  • The modules-on-the-go (MOTG) series from 4D Systems provide a plug-and-play interface to the gen4 range of DIABLO16 and PICASO intelligent display modules. This open interface standard responds to the demand for additional display module interface and communication capabilities. The MOTG approach provides an extremely quick and convenient method of adding a host of low-profile connectivity options to the gen4 display modules.

  • AAEON TechnologyMini PCNano-ITXBOX PC
  • The NANO-002N from AAEON Technology is an embedded box PC based on the Nano-ITX form factor that follows the Broadwell based NANO-001N. Outstanding performance is guaranteed with the dual-core Intel 6th Gen. ULT series (i3/i5/i7 variants). Featuring a wide array of functionalities, this mini-PC delivers different levels of performance at a low power consumption of 15W. The system can be considered as an industrial NUC.

  • AAEON TechnologyEmbedded ComputingBox PC
  • The BOXER-6403M/6404M series from AAEON are the slim, palm-sized and fanless box PCs utilizing low power consumption Intel® Celeron® J1900/N2807 processors. These Box PCs provide fully integrated Gigabit Ethernet LAN ports enabling communication with up to 4 cameras, while featuring built-in digital I/O (BOXER-6403M only) to control lighting for machine vision applications.

  • AAEON TechnologyEmbedded ComputingRugged Tablet PC
  • The RTC-1200SK from AAEON Technology is one of the most complete IP65 rugged tablet computers in today's market. With its various I/O's on board ranging from COM and Ethernet to 3 USB ports and a HDMI port, you basically have a complete mobile panel PC/HMI, but then with 2 hot-swappable batteries. The fact that the RTC-1200SK has been designed with customization in mind, this 11.6" work horse will fit your exact needs.

  • AAEON TechnologyEmbedded ComputingBox PCEmbedded Controller
  • The BOXER-6639 from AAEON Technology is a fanless embedded controller incorporating a high-value desktop processor and wide operating temperature to keep up with Industry 4.0 Automation trend. The BOXER-6639 is powered by 6th Gen Intel® Core™ desktop CPU with longevity support. The flexible mechanical design enables you to change out the CPU in the easiest way possible. With features such as 2 HDMI with 4K resolution and 3 industrial GbE LAN with Intel® industrial-grade I210 chipset this BOXER-6639 aims at delivering superb performance.

  • AAEON TechnologyUP BoardLPWANLoRaWANGateway
  • Once again, the UP Board bridges the gap between makers, innovators and the Internet of Things with the UP LoRa® gateway. This gateway is a combination of an UP board and the IMST LoRa™ concentrator iC880A. By using the LoRa® technology you can deploy thousands of sensors in the radius of kilometers and connect them to the UP LoRa® solution.

  • 4D SystemsDisplayTFT LCDHMI
  • The gen4 series from 4D Systems is a new range of slim and sleek display modules with a new optional optically bonded cover lens bezel for seamless and cost effective integration of a Graphical User Interface to virtually any application. These display modules are designed specifically for ease-of-use and rapid development cycles, with careful consideration for space requirements and functionality.

  • GradConnConnectivityCable Assembly

  • Nautilus series from GradConn is a premium range of dust and waterproof coaxial cable assemblies. With IP67 & IP68 ratings, Nautilus products offer protection from moisture and particle ingress, both mated and unmated.

    Working in conjunction with customers this range of waterproof interface connectors is constructed with internal seal and O-Ring, which prevents ingress thru the inner contact and thru the panel. The connectors have been tested to IP6x, IPx7, IPx8 for both 1 and 5 metres underwater, perfect for applications in demanding harsh environments.

    Nautilus connectors available are SMA front and rear mount, RP SMA, TNC, RP-TNC & BNC. Cable assemblies are available for a huge variety of coax connectors, specialising in Micro coax types such as Hirose, Murata & I-Pex.

    The     Nautilus series consists of 8 key connector types, with 17 cable assemblies as standard. In addition, hundreds of different Nautilus cable assemblies can be configured to meet your requirements.


    Applications
    •  Asset tracking
    •  Metering
    •  Agriculture technology
    •  Remote sensing
    •  Security
    •  Rugged hand-helds


  • AAEON TechnologyEmbedded ComputingBox PC
  • The BOXER-6638U from AAEON is a high performance industrial box PC which is about 30% smaller than its predecessors. High performance is assured with the Intel® Core™ i3-5010U driving the device, the U-series chip comes with greater power-savings and cost-efficiency. This enhanced processing power is used to power the device's many IOs, most prominent of which includes four COM ports. The BOXER-6638U supports a -20 to 60°C temperature range, and a wide operating voltage between 9 and 24V.

    Supporting these enhanced operational parameters is the mechanical construction of the BOXER-6638U. Users wishing to access the device's interior can do so by simply removing screws at the base of the device, with no specialized methods or tools required.


    Features
    •   Intel® Core™i3-5010U CPU
    •  TDP: 15W
    •  Fanless
    •  4 COM ports
    •  2-4 USB3.0 or USB2.0 on front/rear (depending on version)
    •  Display interface: VGA, DP
    •  Dual gigabit Ethernet
    •  Storage devices: mSATA, HDD/SSD
    •  Full and half-size Mini-Card, SIM slot (optional for mSATA)
    •  Wide temperature support: -20 to 60°C
    •  9 to 24VDC supply voltage
    •  Dimensions: 197x174x55mm
    •  OS: Windows 10 (64 bit), Windows 8.1 (32/64-bit), Windows 7 (32/64-bit), Linux, •  Ubuntu 14.10


    Applications
    •  Industrial automation

  • Fischer ElektronikCasing
  • Fischer Elektronik has expanded the small aluminium housing area with the practical, visually appealing and attractively designed Tondo housing series.

    The modern designed versatile Tondo case is an ergonomically shaped small aluminium housing with integrated interior guide grooves to receive non-standardised printed circuit boards in 1.6 and 1.8mm material thickness. They are currently offered in three different standard versions, two surface models (natural colour-, and black anodised) and three lengths (50, 80, 100mm).

    The special geometry of the housing profiles makes it possible to receive film keyboards or front films. In addition to standard colours, it is possible to implement the design strips made of plastic (UL94-V0) integrated into the housing profiles, according to customised colour specifications. Along with the standard models, the housing can be mechanically processed, surface-treated and printed by customer request.


    Features
    •  Ergonomic cases out of shell profile which are slotted into each other
    •  Internal guide grooves for non-standardised components
    •  Circuit board thickness: 1.6mm at the side wall, 1.8mm at the screw-slot
    •  Easy and quick mounting
    •  Profiles are M3 pre-threaded
    •  Standard strip colours: turquoise, erika violet, ultramarine, chimney red and narcissus yellow
    •  Customizing colours and modifications on request


    Applications
    •  Miniature handheld applications

  • Avalue TechnologyEmbedded ComputingPanel PCHMI
  • The OFT-series from Avalue Technology are true flat design open frame tablets, designed with an Intel® BayTrail-T/CR Z3735F 1.33GHz quad core CPU with 2GB DDR3L RAM and up to 32GB eMMC on board memory. To meet different application size needs, these tablets are available in sizes from 7 inch up to 21.5 inch.

    The true flat design screen with PCAP touch accommodates a fast and sensitive touch response. Due to their ultra slim fanless design, lower power consumption and easy installation, these tablets fit into a variety of applications like POS, vending machine, gaming, digital signage and home automation.

    The OFT-series come with USB 2.0, micro USB client, GbE (PXE Boot), micro SD card slot (SDXC support), HDMI, phone jack, GPIO, RS232, RS485, optional WiFi/Bluetooth combo module e.g.. They are multi OS compatible with Windows, Linux, Android and Ubuntu so they can easily be integrated in existing systems.


    Features
    •  True flat design open frame tablets
    •  Available sizes: 7", 10.1", 15.6", 21.5"
    •  Intel® Atom™ Z3735F, 1.33GHz quad core
    •  2GB RAM, 8GB or 32GB eMMC onboard
    •  PCAP Touch
    •  WiFi (802.11B/G/N)/Bluetooth combo module (optional)
    •  10/100 Ethernet (PXE Boot)
    •  micro SD card slot (SDXC support)
    •  Touch board interface (power, brightness, volume, LED)
    •  16-bit programmable GPIO
    •  RS232(TX/RX) or RS485
    •  Typical DC 19V Input, Optional 12V & 24V support
    •  Optional POE (10" only)
    •  Multi OS compatible with Windows, Linux, Android and Ubuntu


    Applications
    •  Kiosk
    •  Point of information
    •  Self-checkout service
    •  Smart home automation
    •  Vending machines

  • TEConnectivityPanel Switch
  • The AV-series from TE Connectivity (TE) is an anti-vandal switch series designed for security and reliability in a variety of panel mount industrial and building applications. The large pushbutton and available LED indicators illuminate the switch and allow for an easy user interface.

    TE's anti-vandal series is available in panel sizes of 16, 19, and 22mm, with various pushbutton symbols including spot, ring, and power logo. The AV-series switches are sealed to IP67 and available in single and double pole configurations.


    Features
    •  Vandal proof solution
    •  Jam nut accessible from the rear of the panel
    •  Stainless steel actuator
    •  Single or double pole configurations
    •  16, 19, and 22mm panel diameter size
    •  Long life cycle: 1,000,000 actuations (momentary)
    •  Actuator force typically: 2.5 - 4.5N (depending on version)
    •  IP67 sealed
    •  LED indicator version available
    •  Pushbutton symbols spot, ring and power logo available
    •  Operating temperature: -20° to +55°C
    •  UL (E46765) for AV19, AV22 series
    •  RoHS Directive 2002/95/E compliant


    Applications
    •  Elevator & escalator
    •  Kiosks
    •  ATM machines
    •  Public ticket dispensers
    •  Vending machines

  • TDKFilter
  • The B84142A*166 series from TDK is a series of 2-line EMC filters designed for rated currents of 10A, 16A, and 30A at a rated voltage of 250VAC (50/60Hz). These filters are very compact in size: the 10A and 16A types measure only 84.5x52x38mm, and the 30A version only 130x84x69mm. This permits mounting even when space is very limited.

    Another feature of the B84142A*166 is its extremely low leakage current of less than 0.5mA and 1.8mA. This prevents unintentional tripping of ground fault circuit interrupters (also known as residual current devices). In addition to their compact size, these filters offer a very high insertion loss of up to more than 100dB.

    The new filters meet the requirements for climate category 25/100/21, IEC 60068-1 and protection class IP00. The filters can be operated without derating at ambient temperatures of up to 50°C. Approvals to EN, UL and CSA are pending. Applications for the new EMC filters include converters and power electronics systems.


    Features
    •  Very high insertion loss of up to and exceeding 100 dB
    •  Easy to install
    •  Rated currents: 10A, 16A or 30A
    •  Rated voltage: 250VAC (50/60 Hz) / 250VDC
    •  Very compact design
    •  Degree of protection IP 201 (for 30A model)
    •  Extremely low leakage current of < 0.5 to 1.8mA
    •  Tab connectors
    •  Finger-safe terminal blocks
    •  UL and cUL approval
    •  ENEC approval pending


    Applications
    •  Elevators
    •  Conveyor systems
    •  Pumps
    •  Traction systems
    •  HVAC systems (heating, ventilation and air conditioning)
    •  Power supplies
    •  DC applications

  • ELA InnovationWireless CommunicationActive RFIDSensor

  • ELA Innovation develops readers and active RFID tags to monitor goods for the tracking of tools and equipment in the logistics industry, as well as man-down alarm technology. Its activities hinge around the research & development, manufacturing and sales of high range active RFID solutions, industrial wireless sensors and connected objects.

    ELA’s greatest growth has been in the deployment of ’telematics solutions’ for trucks and trailers, in which data about goods and drivers is transmitted via wireless sensors and tags to a reader, and is then forwarded by a cellular connection, such as the     FOX3 from Falcom, to a back-end server.

    The systems are used to identify the conditions of goods within a trailer, along with the open or closed status of the trailer door. This information is paired with GPS-based data, collected by a user’s automatic vehicle location box (such as the FOX3 from Falcom) and sent to a server. This way users can receive alerts of the unexpected opening of a trailer or the breaching of an accepted temperature range within the trailer.


    Features
    •   Wide range of active tags, readers, software and antennas
    •   Long RF range (up to 100m)
    •   Robust industrial products
    •   Trailer’s temperature and humidity monitoring
    •   Trailer & Driver ID
    •   Event detection (doors opening, contact detection, asset’s movement, etc.)
    •   Active RFID Integration with fleet management solutions
    •   Automatic asset inventory
    •   Battery life up to 10 years

    Applications
    •   Refrigerated transport
    •   Transport of blood
    •   Biomedical transport
    •   Pharmaceutical industry
    •   Monitoring drill temperature

    At picture
    1. SCIEL reader lite connected to FOX3
    2. Active RFID tag for Driver ID
    3. Active RFID tag for Trailer ID
    4. Wireless RFID Temperature Sensor for Temperature Monitoring
    5. Wireless RFID Humidity Monitoring
    6. Active RFID TAG for Asset ID for Automatic Inventory
    7. Wireless RFID Magnetic Sensor for Door Opening Detection


  • TDKInductor
  • The B82559 series (ERU25) from TDK is a series of helically wound SMD high-current chokes with current capabilities of up to 71A. The ERU25 is based on improved ferrite cores and the flat rectangular wires that allow a copper filling factor of almost 100 percent.

    The low core losses and compact terminal areas of the self-supporting winding mean an excellent energy storage density. Despite its high performance, these chokes have a footprint of only 23.5 x 25.3mm2 and insertion heights that vary between 8.95 and 12.85mm.

    The inductance values cover the range from 0.44 to 10 uH, and its permissible rated currents are between 24 and 71A for series resistances of 0.2 to 2.2 mohm.


    Features
    •  High rated current, up to 71A
    •  Extremely low DC resistance
    •  Rated inductance: 0.44 to 10 uH
    •  Series resistances: 0.2 to 2.2 mohm
    •  Very low profile and extremely small footprint (23.5 x 25.3mm2)
    •  Suitable for pick-and-place processes
    •  RoHS-compatible
    •  Easily customized


    Applications
    •  DC/DC converters
    •  Distributed power supplies
    •  Intermediate bus converters
    •  VRM modules
    •  POL converters
    •  Solar converters

  • RRC power solutionsBatteryCharger
  • The RRC-SMB-MBC from RRC is a 50W mini desktop battery charger designed to handle the standard battery form factors RRC2040, RRC2040-2, RRC2054, RRC2057 or compatible smart batteries with a similar footprint.

    Equipped with a microchip, smart batteries are able to communicate with the charger and user alike. This battery-controlled charging method makes sense when considering that some packs share the same footprint but contain different chemistries, requiring alternative charge algorithms. With this technology each battery receives the correct charge levels and terminates full-charge with proper detection methods.

    RRC is a worldwide leader in designing and manufacturing battery chargers for medical, industrial, military and consumer applications. Their full line of battery charger designs meets the widest range of requirements, from simple single-cell batteries, to high-powered "smart" batteries.


    RRC now provides the following smart battery desktop chargers:
    RRC-SMB-MBC120x64x43mm (LxWxH)50W for RRC2040, 2040-2, 2054 and 2057
    RRC-SMB-UBC151x90x43mm (LxWxH)65W for RRC2020, 2024, 2040, 2040-2, 2054 and 2057
    RRC-SMB-UBC-DIS151x90x43mm (LxWxH)Discharge* to SoC 30% for RRC2020, 2024, 2040, 2040-2, 2054 and 2057

    *Discharge power is limited to 5W. The discharger will bring back the batteries to ship-mode after discharging.

    Features
    •  50 Watts desktop battery charger for the standard smart battery form factors
    •  Single bay charger
    •  Optimized charging process by using RRC batteries:
           - Higher charging cycles
           - Faster charging
    •  Simple plug and play operation
    •  Input voltage 100 to 240VAC
    •  Charge current up to 4.8A
    •  Approvals: CE / CB / UL / RCM / GOST / EAC / CCC / PSE / KC
    •  Safety Standard IEC 60950
    •   External power supply level VI for worldwide use with new IEC 60320 C5 connector
    •  Country specific AC input cables available (Europe, UK and US versions)


    Applications
    Standard charging station for mobile devices used in medical, industrial and consumer markets.

  • Fischer ElektronikCasing
  • The increasing integration density of printed circuit board assemblies and the increasing amounts waste heat generated by the electronic components pose ever greater challenges for the cooling concept of the cases that are used. For these applications Fischer Elektronik offers a series of cases, the GE K... which has optimal heat dissipation properties.

    The new, one side open, U-shaped profile of the cases contain integrated guides to fit electronic components or circuit boards as well as an insertable heatsink which assures the function of heat dissipation to the surroundings. It is dimensionally adjustable to the cooling concept of any assembly. Fixing the heatsink is through front and rear covers that are bolted to the profile of the case.

    As standard, the GE K series is available in three different sizes, seven lengths (50, 80, 100, 120, 160, 200 and 220 mm) and in two surface finishes (natural and black anodised). The basic case, the heatsink as well as the covering plate can be mechanically machined, surface-treated and printed according to the customer's requirements. The GE K... cases are supplied as a disassembled assembly set including the covering plate and assembly accessories.


    Features
    •  Modern robust, elegant design
    •  Optimal heat dissipation properties
    •  One side open, U-shaped profile
    •  Integrated guides to fit PCBs and insertable heatsink
    •  Dimensionally adjustable
    •  Available in three different sizes
    •  Standard lengths: 50, 80, 100, 120, 160, 200 and 220 mm
    •  Natural and black anodized surface finishes available
    •  Supplied as set (incl. cover panels and mounting materials)

  • HAHNInductorPassive PFC
  • One of the most important environmental conditions for the smooth operation of electrical equipment is a reliable quality of supply networks. In view of the increasing network pollution and the necessary reduction to comply with the power network stability, the requirements are to be adapted to device manufacturers to comply with the electromagnetic compatibility.

    As from April 2016 the harmonization of the EU Directive 2004/108/EC towards the new version of the 2014/30/EG will be effective. In order to meet these future requirements on the grid-connected emissions, HAHN already provides an extended mains choke series, which allows you within very short time to optimize the EMC-features of your device, compliant to the new standard specifications.

    With a power range up to 10A as well as a wide range of inductance values, this series covers completely the range of common household appliances using their typical plug connected load. Through compliance with the standards in relation to the relevant standards EN 61558-2-20 for chokes, EN 62041, as well as the compliance with the glow wire tests of all materials used in accordance with EN 60335-1 and the use of insulation to the insulation class B and F UL 1446, the integration of these components is quick and easy.


    Features
    •  Excellent temperature fluctuation resistance properties
    •  High electrical safety and long service-life features
    •  High voltage resistance to core
    •  Open or vacuum-encapsulated versions
    •  Per item tested quality with certificate
    •  Self-extinguishing cast housing and sealing material
    •  Come with test certifications to ENEC 10-, VDE, UL- and CSA-regulations
    •  According to REACH and RoHs regulations


    Specifications

    BVD EI 306BVD EI 382BVD EI 423BVD EI 482BVD EI 542
    Inductivity1.0 to 20.0mH1.0 to 15.0mH1.0 to 20.0mH1.0 to 20.0mH1.0 to 20.0mH
    Nominal current (max.)5.2A4.7A5.9A8.7A7.7A
    Height (max.) 34.3mm28.6mm38.3mm39mm42.3mm



    Applications
    •  Industrial and household equipment

  • TDKFilter
  • The sine-wave filters from TDK are EMC filters for frequency converters designed to reduce the proportion of high clock frequencies at the output of converters. This allows the interference-free operation of variable speed drives with long motor cables.

    Motors are often connected to converters over distances of more than 100 meters. The parasitic capacitances of such long cables result in reactive power. Motor noises and increased eddy current losses are also produced. TDK sine-wave filters significantly reduce these negative effects. Moreover, they can reduce filtering requirements at the input of the converters, so that less expensive types can be used there.

    Sine-wave filters of the B84143V*R227, *229 and *230 series are designed for continuous currents of 4 to 320A at rated voltages of between 520 and 690V. The permissible clock frequency of the converters is between 2.4 and 16kHz, depending on the type.

    Where it is also desirable to dispense with shielded motor cables, it is recommended to use the B84143V*R127 filter series with SineFormer® technology.



    EMC service - measurement - analysis - consultation - reporting
    The EPCOS EMC Laboratory in Regensburg offers comprehensive, in-depth EMC services: from pre compliance investigations on prototypes to conformity testing of series-production equipment. A test report provides proof of compliance with the relevant standards and is the basis for the customer's declaration of conformity.



    Features
    •  Reduction of motor noise and eddy current losses
    •  Generation of sinusoidal phase-to-phase voltage with low ripple dv/dt reduction
    •  Easy to install
    •  Compact design with natural cooling
    •  Continuous currents of 4 to 320A
    •  Rated voltages between 520 and 690V
    •  Up to 10 meters wiring between inverter and filter, operation under full load
    •  IP20 up to 95A
    •  IP21 housing B84143Q
    •  No shielded cables needed
    •  Up to 180A: tube clip for convenient shield bonding
    •  UL approved insulation system T-EIS-CF1


    Applications
    •  Elevators
    •  Traction and conveyer systems
    •  Pumps
    •  HVAC systems (heating, ventilation and air conditioning)

  • RAFISwitching DevicesKeyswitch

  • The RAFIX 22 FS+ keyswitch from RAFI is an extraordinarily compact solution with an overall height of only 45.1 mm from the front plate. Despite its small dimensions, the compact keyswitch is characterized by a great level of tactility.

    The     RAFIX 22 FS+ keyswitch switch is offered with momentary and latching functions as well as four different rotational angles. With IP65 protection class the unit is water-jet proof. Assembly takes place by attaching a threaded ring, the diameter of the mounting hole is 22.3mm for a contact spacing of 35x35mm.

    There are two connection type options, solder terminal contact blocks for PCB mounting or quick-connect (QC) contact blocks for directly wired connection. With the PCB solution, the switch reaches the low mounting depth typical of only 9.2 mm. This offers the basis for modern housing designs with a very flat construction. The QC contact blocks, with a mounting depth of 27mm, make quick and economical assembly possible.

    Pushbutton, keyswitch or selector switch applications from the same series can be combined on the same PCB with RAFI short-travel keyswitches in various dimensions and with various tactile switching forces and actuating areas.

    The pre-fabrication of the cable assemblies with contact blocks also makes everything especially easy due to the tool-free assembly principle. Front rings, for labeling the function, are available in various colors as well as metalized designs.


    Features
    •  PCB or quick-connect (QC) contact blocks
    •  Round or square collar type
    •  Overall height: 44.1mm
    •  Momentary and latching contact functions
    •  4 different rotational angles
    •  Large actuation area with very good tactility
    •  Mounting hole 22.3mm with locating lug to IEC 60 947
    •  Min. spacing of 30 x 30mm possible
    •  Degree of protection to IP65
    •  Anti-twist protection
    •  Different front ring types: metal or plastic in various colours
    •  Can be labelled
    •  Operating temperature: -25° to +70176C
    •  Locking systems created according to DIN EN 1303
    •  Protective cap for keylock switch (optional)


    Applications
    •  Healthcare electronics
    •  Elevator and transport systems
    •  Industrial engineering
    •  Consumer electronics


  • Insight SiPWireless CommunicationBluetooth
  • The ISP1302 from Insight SIP is a smart Bluetooth module based on the nRF51 Bluetooth Low Energy chip from Nordic Semiconductor in an ultra-small LGA package of only 8.0 x 8.0 x 1.0 mm. The module integrates the antenna, the RF matching circuit, all decoupling and load capacitors plus the 16 MHz crystal oscillator. The ISP1302 works as a complete bi-directional transmitter/receiver.

    The Bluetooth module is perfectly suited for devices that requires low power wireless connectivity and low cost. It is designed in accordance with the Bluetooth Smart (low energy) specification contained within v4.1 of the overall Bluetooth specification.

    The ISP1302 has several end applications, the antenna was designed to be compatible with several ground-plane antenna sizes such as USB dongles or cell phones. It illustrates Insight SiP’s expertise in RF & Front End miniaturization and antenna integration.

    The modules are specifically designed for both PC and smart phone peripherals and ultra-low power applications such as sports and wellness sensors.

    Features
    •   Ultra Small size LGA Package 8 x 8 x 1 mm
    •   Based on nRF51 SoC BLE transceiver
    •   32-bit ARM Cortex - M0 CPU
    •   Available with 128 K Flash & 16K SRAM
    •   Antenna and Matching integrated
    •   MCU and radio 16MHz crystal integrated
    •   16 IOs including 5 ADC and 1 analog reference
    •   Supports Bluetooth v4.1
    •   External synchronization 32kHz crystal (optional)
    •   External DC/DC loading circuit connection (optional)
    •   IPv6 Connectivity
    •   Single 1.8 to 3.6 V supply
    •   Temperature -40 to +85 °C


    Applications
    •   High volume BLE applications
    •   Connected sensors for medical devices, healthcare, sports, fitness, industrial
    •   IoT applications, connected objects
    •   Wearable technology
    •   Home automation
    •   Beacons

  • SIMComWireless CommunicationLTE

  • The SIM7100E from SIMCom is an ultra compact multi band LTE module which is based on the Qualcomm MDM9215. This complete multi-band TDD-LTE/FDD-LTE/WCDMA/GSM/GNSS SMT type module is designed with a powerful ARM Cortex™ A5, QDSP6 core processors. It delivers 50Mbps-up and 100Mbps-down data rates on LTE FDD networks, fully backward compatible with existing WCDMA/HSPA networks.

    The     SIM7100E has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,Keypad, PCM, etc. With abundant application capabilities like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.

    The miniPCIe type SIM7100E-PCIE is a SIM7100E module combined with a miniPCIE adapter
    board.


    Features
    •  Five band FDD-LTE B1/B3/B7/B8/B20
    •  Dual band TDD-LTE B38/B40
    •  Dual band UMTS/HSDPA/HSPA+ B1/B8
    •  Dual band GSM/GPRS/EDGE 900/1800MHz
    •  Qualcomm MDM9215 based
    •  ARM Cortex™ A5, QDSP6 core processors
    •  LTE: 50Mbps-up & 100Mbps-down
    •  Supply voltage: 3.4 to 4.2V
    •  Operating temperature: -40° to +85176C
    •  Control Via AT Commands or Gobi API
    •  Standalone GNSS
    •  SMT package, dimensions 30x30x2.9mm
    •  Embedded FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS


    Applications
    •  Smart metering
    •  Healthcare and alarm products
    •  Mobile POS


  • AAEON TechnologyEmbedded ComputingBox PC
  • The RTC-600A from AAEON Technolgy is an 5.7" Android™ powered rugged tablet that's engineered for rough and tough applications. This tablet will prove itself a worthy companion through all kinds of circumstances, defying water, dust, sand, snow and mud during. Even dropping the RTC-600 will not give you the nightmares you normally have dropping your consumer-grade tablet.

    The RTC-600A features an ARM® Cortex® dual-core TI® OMAP™ 4470 CPU (up to 1.5 GHz), LPDDR2 1GB SDRAM and 16GB eMMC flash. It can be operated in temperatures from -20° to 60°C, making it a much more durable and practical contender than its "sleeker" counterparts.

    The RTC-600A is equipped with WiFi, BlueTooth, GPS/GLONASS and 3G to ensure accurate positioning and fast data response. The docking station will even provide extra (back-up) connectivity through physical Ethernet. Furthermore, the 5MP auto-focus camera with flash will create the right picture for you in any environment.

    Next to the optional NFC/Mifare RFID reader, the optionally integrated solid-state 1D/2D barcode reader will read a variety of barcodes. It reads the most popular used barcodes from 1D EAN/UPC to 2D DataMatrix codes. The hot-swappable battery will give you the flexibility to work some extra hours past the obligatory 8-hour work-day.


    Features
    •  5.7" WXGA (1280 x 720) TFT LCD 420nit display with LED backlight
    •   TI® OMAP™ 4470 CPU, up to 1.5GHz
    •  LPDDR2 1GB SDRAM, 16GB eMMC flash
    •  Projected capacitive multi-touch panel, Gorilla Glass
    •  Li-Polymer high capacity battery, up to 8 hours battery life
    •  Available with single or dual battery
    •  Extended swappable battery, MIL-STD 810G, IP67 compliant
    •  GPS/ GLONASS simultaneously
    •  WiFi a/b/g/n, BT 4.0, WWAN, 3G & LTE (optional)
    •  Light & G-sensor, E-compass, vibrator, 5MP camera
    •  1D/2D bar code scanner, MSR/smart card reader (optional)
    •  Supports NFC/RFID, variant extensions
    •  Docking station (optional)
    •  Android 4.2 (Jelly Bean)


    Applications
    •  Logistic & medical industry
    •  Industrial (field) service
    •  Warehouse management
    •  Construction sites
    •  Agriculture
    •  POS







  • TDKMains Filter
  • The B84243A8x series from TDK are very compact EPCOS 3-line EMC filters for frequency converters. These high-performance filters are suitable for a rated voltage of 530VAC in 50/60Hz grids. The compact dimensions lie between 90x40x95mm and 250x85x120mm. The B84243A8 series currently comprises seven different types that are designed for currents of between 3A and 60A, based on a rated temperature of 50°C.

    These EMC filters typically perform according to EN 61800-3 C1 and C2 for motor cable lengths of respectively up to 25 meters and 50 meters.

    Apart from their outstanding EMC performance, these 3-line EMC filters also feature very short discharge times. At currents up to 44A the filters achieve a residual voltage of <60V in less than one second. The 3A version with a leakage current of less than 2mA has been specially developed for plug-in devices that must meet low leakage current limits. The other models have leakage currents of no more than 5.1mA and can also be operated in environments with sensitive residual current devices.

    These filters are designed for a high short-circuit current (SCCR) of 100kA in accordance with UL 508. Approvals according to UL, CSA and ENEC are pending.

    Recessed connections permit optimum access to the mounting bracket, making the filters suitable for installation in switching cabinets or where limited space is available.

    Features
    •  Rated voltage of 530VAC in 50/60Hz grids
    •  Typical performance according to EN 61800-3 (up to 50m motor cable length)
    •  Metal case
    •  Outstanding EMC performance
    •  Discharge time up to 44A types: <60V within 1s
    •  Seven different types for currents of between 3A and 60A
    •  Short-circuit-proofed up to 100kA according to UL 508
    •  Metal case
    •  Dimensions between 190x40x95mm and 250x85x120mm
    •  Low leakage currents of just 2 mA to 5mA (at 400 VAC)
    •  Degree of protection: IP 201
    •  Approvals UL/CSA, (ENEC pending)




    Applications
    •  Frequency converters
    •  Elevators
    •  Three phase drive applications
    •  Textile machines, packaging machines, machine-tools
    •  Pumps
    •  Conveyor systems
    •  HVAC systems



mastercard paypal ideal
Texim Europe BV: BTW/VAT Registration: NL814671871B01 | Dutch Chamber of Commerce: 08138443
Contact details | Phone
Contact details | E-mail
Website functions